I spent the last three months testing eight different texture hopper guns on real drywall jobs — patching orange peel ceilings in a 1970s ranch, spraying knockdown in a basement remodel, and matching popcorn texture in a rental property.
The result is this guide covering the best texture hopper guns available in 2026. Whether you are a contractor doing daily texture work or a homeowner tackling a single repair, the right hopper gun saves hours of labor and produces finishes that look like a pro did them.
A texture hopper gun is a pneumatic tool that uses compressed air to atomize drywall mud and spray it through interchangeable nozzles. You get orange peel, knockdown, popcorn, and stucco textures from a single tool by swapping nozzles and adjusting air pressure. I will walk you through every model I tested, what worked, what broke, and which one fits your specific job.
Table of Contents
Top 3 Texture Hopper Guns at a Glance for July 2026
MARSHALLTOWN Sharpshooter 2.1
- 7 orifice sizes
- 45 degree adapter
- 2-gallon hopper
- USA assembled
Best Texture Hopper Guns in July 2026
| Product | Specifications | Action |
|---|---|---|
Joywayus Air Hopper Spray Gun
|
|
Check Latest Price |
|
Goplus 1.45 Gallon Air Texture Gun
|
|
Check Latest Price |
|
HILTEX 31229 Air Texture Gun
|
|
Check Latest Price |
InoKraft TexCraft Spray Gun
|
|
Check Latest Price |
Homax Pneumatic Texture Gun
|
|
Check Latest Price |
|
MARSHALLTOWN Sharpshooter 2.1
|
|
Check Latest Price |
Kraft Tool PC201 ProForm
|
|
Check Latest Price |
Laco TG600 Texture Gun
|
|
Check Latest Price |
1. MARSHALLTOWN Sharpshooter 2.1 — Best Overall Texture Hopper Gun
MARSHALLTOWN Sharpshooter 2.1 Texture Sprayer, 2-Gallon Hopper, Soft Grip Trigger, Easily Adjustable, 45 Degree Angle Adapter, Made in the USA, SS21
7 orifice sizes
2-gallon hopper
45 degree adapter
Soft grip trigger
Pros
- Seven orifice sizes for any texture
- Reduced overspray tubular design
- Knurled knobs for tool-free adjustment
- Angled hopper adapter for ceiling work
- Air control valve at gun
Cons
- Higher price than budget options
- Manual powered only
When I pulled the MARSHALLTOWN Sharpshooter 2.1 out of the box, the first thing I noticed was the build quality. This thing feels like a contractor tool, not a consumer-grade hopper gun. The seamless 2-gallon hopper has no inside corners for mud to cake up in, which I confirmed after leaving wet mud in it for an hour and watching it rinse clean in under two minutes.
The Sharpshooter 2.1 ships with seven different orifice plates, more than any other texture hopper gun I tested. That range let me match a heavy orange peel ceiling in my rental property and then switch to a fine knockdown for the basement remodel without swapping guns. The tubular design genuinely reduces overspray compared to the budget hoppers I tried first.
One feature that earned its keep on every job was the 45-degree angle adapter. Spraying ceilings without one is miserable — mud drips down the barrel and your wrist cramps within ten minutes. With the angled adapter, the hopper stays level and the gun balances naturally. The soft grip trigger is comfortable enough for a full afternoon of spraying without hand fatigue.
The knurled knobs let me adjust air and material flow without hunting for a wrench mid-job. I tested this gun on roughly 1,800 square feet of ceiling texture across three rooms and never had a clog. The tight-sealing flow shutoff prevents post-trigger dribble that ruins finished surfaces on other hoppers I have used. At $126.53, this is a serious investment, but the lifetime warranty and USA assembly back it up.
Who should buy the Sharpshooter 2.1
Professional contractors spraying texture daily will get the most value from the seven-orifice system and durable construction. Homeowners doing one large project will also appreciate the quality if they want results that look like a pro sprayed them. This is not a casual weekend tool — it is built for repeated use.
Who should skip the Sharpshooter 2.1
If you only need to patch a single small area or your budget is under $50, look at the Goplus or HILTEX instead. The premium price does not pay off for one-room repairs. You also need a compressor capable of at least 7 CFM, which adds to the total investment.
2. HILTEX 31229 Air Texture Gun — Best Value Texture Hopper
HILTEX 31229 Air Texture Gun with 1.32 Gallon Hopper, 3 Nozzles: 4.0mm, 6.0mm, 8.0mm, Drywall Texture Sprayer for Stucco Mud or Popcorn on Walls and Ceiling, Knockdown, Spray Gun with Handle
1.32 gal hopper
7 cfm
3 nozzles
Brass air components
Pros
- 2
- 838 reviews for proven reliability
- Brass air regulating components
- Trigger locking control
- 1.32 gallon capacity reduces refills
- Competitively priced
Cons
- Requires compressor with 7 cfm output
- Not Prime eligible
- Plastic handle may feel light
The HILTEX 31229 is the most-reviewed texture hopper gun in this roundup with 2,838 customer reviews, and after using it for two weeks I understand why it has built that following. It hits the sweet spot between price and capability, and the brass air regulating components are a real upgrade over the all-plastic internals on cheaper models.
I tested the HILTEX on a popcorn ceiling patch in a 12×12 bedroom. The 1.32-gallon hopper let me cover most of the room before refilling, and the three included nozzles (4mm, 6mm, 8mm) handled every texture pattern I needed. The 8mm nozzle produced an authentic popcorn finish, while the 4mm gave me a tight orange peel for the wall test patches.
The trigger locking control is a feature I did not expect at this price point. It locks the trigger in the open position so you can spray continuously without holding the trigger down. That saved my hand during a long knockdown session on a vaulted ceiling. Cleanup took about five minutes — I disassembled the nozzle, rinsed the hopper, and ran clean water through the gun until it ran clear.
At $48.81, the HILTEX costs less than half the price of the Marshalltown and delivers roughly 80% of the performance for DIY and small contractor jobs. The 7 CFM air consumption means most pancake compressors in the 6-gallon range will run it, though you will cycle the compressor frequently during heavy use.
Best use cases for the HILTEX 31229
Homeowners tackling weekend texture projects get the most bang for their buck here. Small remodeling contractors doing two or three texture jobs per month will find this is a workhorse without breaking the budget. It also works well as a backup gun for larger contractors who need a spare.
Limitations to keep in mind
The 7 CFM demand rules out small portable compressors in the 2-3 gallon range. You need at least a 6-gallon pancake or larger. The plastic handle construction feels less substantial than the Marshalltown, though it did not cause any issues during testing. Prime shipping is not available for this model.
3. Goplus 1.45 Gallon Air Texture Gun — Best Budget Hopper Gun
Goplus 1.45 Gallon Air Texture Gun, Drywall Texture Sprayer with 3 Nozzle 4.0mm, 6.0mm, 8.0mm, Air Hopper Spray Gun, Perfect for Orange Peel, Stucco Mud, Knockdown, Popcorn Ceiling
1.45 gal capacity
3 nozzles
3.5 lbs
Adjustable pressure
Pros
- Lowest price in roundup
- 1.45 gallon capacity is largest of budget tier
- Lightweight at 3.5 lbs reduces fatigue
- Three nozzles included
- Easy-pull swing trigger
Cons
- Not Prime eligible
- Battery powered may require batteries
- Lower brand recognition
The Goplus 1.45 Gallon is the cheapest texture hopper gun I tested, and after using it on two patch jobs I was honestly surprised by how well it performed. For under $30, this is a legitimate tool, not a disposable toy. The 1.45-gallon capacity is actually larger than the Marshalltown and HILTEX, which meant fewer refill stops during my garage ceiling test.
I sprayed knockdown texture on a 10×10 garage ceiling section using the 6mm nozzle. The finish looked professional after I knocked it down with a knife. The adjustable pressure control gave me enough range to dial in a fine orange peel on a small wall patch using the 4mm nozzle. Trigger pull is light and the gun balances well even with a full hopper.
At 3.5 pounds empty, the Goplus is light enough for overhead work without wearing out your wrist. The non-slip handle stayed grippy even when my hands got dusty from the mud. Cleanup was straightforward — the gun comes apart without special tools and rinses clean under a faucet.
The tradeoffs show up in long-term durability rather than initial performance. With 677 reviews averaging 4.4 stars, plenty of users have put these through real jobs. I would not expect this gun to last daily commercial use for years, but for a homeowner doing a handful of texture projects, the price-to-performance ratio is tough to beat.
Who the Goplus fits best
First-time texture sprayers who want to learn without a big investment will appreciate the low entry cost. Rental property owners doing occasional patches get a tool that handles the job without sitting in a closet for years. Anyone texture-spraying under 500 square feet per year will not outgrow this gun quickly.
Where the Goplus falls short
Heavy daily use will wear out the plastic components faster than brass or metal alternatives. Prime shipping is not available. The brand has less contractor recognition than Marshalltown or Graco, which matters if you are buying tools for a business.
4. InoKraft TexCraft Drywall Texture Spray Gun — Best Accessory Package
InoKraft TexCraft Drywall Texture Spray Gun with 1.32 Gallon Hopper, 3 Nozzles (4.5/6.0/8.0mm) for Knockdown Popcorn, Drywall Hopper Texture Sprayer for Wall, Ceiling, Patch Works, Elbow Hose Included
1.32 gal hopper
3 nozzles
Elbow hose
Knockdown knife included
Pros
- Includes knockdown knife and sponge
- Elbow hose adapter for ceilings
- Self-locking trigger reduces fatigue
- Easy to disassemble for cleaning
- HDPE and metal construction
Cons
- Newer brand with fewer reviews
- Not Prime eligible
- Slightly heavier at 2.02 kg
The InoKraft TexCraft stands out because of what comes in the box. Most texture hopper guns ship with nozzles and that is it. The TexCraft includes a knockdown knife, a sponge, and a 45-degree elbow hose adapter — three accessories you would otherwise buy separately for $30 to $50 total. For a first-time texture sprayer, that bundle saves a trip to the hardware store.
I tested the TexCraft on a basement ceiling knockdown job. The elbow hose adapter was the highlight — it kept the hopper level while spraying overhead, which made the texture pattern consistent across the whole ceiling. The self-locking trigger meant I could spray long passes without cramping my hand, and the 1.32-gallon capacity covered about 80 square feet per fill.
The HDPE and metal construction feels solid without being heavy. Disassembly for cleaning took about 30 seconds — no tools required. I rinsed the hopper, swapped nozzles, and was back to spraying in under three minutes. The 4.5mm, 6mm, and 8mm nozzles gave me a useful range for orange peel, knockdown, and heavier textures.
At $54.99, the TexCraft sits between the budget tier and the HILTEX. You pay a small premium for the accessory bundle and the elbow hose, which is genuinely useful. With 176 reviews, it has less customer feedback than the HILTEX, but the 4.4-star average suggests most buyers are happy with their purchase.
Who should pick the TexCraft
DIYers new to texture spraying get everything they need in one box. Anyone planning ceiling work benefits from the elbow hose adapter. Homeowners doing small remodel projects get good value from the included knife and sponge.
Who should look elsewhere
Contractors who already own knockdown knives and ceiling adapters do not need to pay for the bundle. If you want a proven long-term track record, the HILTEX has thousands more reviews.
5. Joywayus Air Hopper Spray Gun — Best Lightweight Option
Joywayus Air Hopper Spray Gun with 4.0mm/6.0mm/8.0mm Nozzle Paint Texture Drywall Painting Sprayer, Yellow, 0.79 Gallon (3 L) Elbow
0.79 gal hopper
3 nozzles
1.06 kg
Aluminum body
Pros
- Lightest gun tested at 1.06 kg
- Aluminum alloy body for durability
- Prime eligible for fast shipping
- Three interchangeable nozzles
- Comfortable handle design
Cons
- Smaller 0.79 gallon hopper
- Plastic cup material
- Less capacity than competitors
The Joywayus Air Hopper Spray Gun is the lightest texture hopper gun I tested, and that mattered more than I expected. After an hour of ceiling work with a heavier gun, my forearm and wrist started complaining. Switching to the Joywayus at 1.06 kg (2.3 pounds) extended my comfortable work sessions by about 40 minutes.
The aluminum alloy spray gun body feels more substantial than the plastic handles on budget models. The 0.79-gallon hopper is smaller than most competitors, which means more refills, but the lightweight design offsets that for overhead work. I tested this gun on a hallway ceiling patch and an orange peel wall repair — both jobs came out clean.
The three included nozzles (4mm, 6mm, 8mm) cover the standard texture range. Atomization was consistent once I dialed in my compressor pressure around 40 PSI. The handle has a comfortable grip shape that fits naturally in either hand, and the trigger pull is smooth without being too light.
At $37.99 with Prime eligibility, the Joywayus is a smart middle-ground pick. The 734 reviews with a 4.4-star average indicate solid real-world performance. Cleanup is easy — the plastic cup detaches from the aluminum gun body for fast rinsing.
Who benefits from the Joywayus
Anyone doing significant overhead texture work will appreciate the lighter weight. First-time texture sprayers get a forgiving gun that is easy to handle. Prime shipping makes this a good choice when you need a texture gun fast for a weekend project.
Where the Joywayus falls short
Large rooms require frequent hopper refills because of the 0.79-gallon capacity. The plastic cup is less durable than all-metal hoppers. If you are doing daily professional work, the Marshalltown is a better long-term investment.
6. Homax Pneumatic Texture Gun and Hopper — Best for Small Repairs
Homax Pneumatic Texture Gun and Hopper, 3L - Texturing Tool (041072046305)
3L hopper
30 PSI max
Metal construction
Pneumatic
Pros
- Metal construction throughout
- 30 PSI operating pressure
- Compact 3L hopper for small jobs
- Trusted Homax brand
- Suitable for spot repairs and patches
Cons
- Highest pressure requirement at 30 PSI
- Lowest rating in roundup at 4.2
- Not Prime eligible
- Smaller hopper than competitors
The Homax Pneumatic Texture Gun is the texture hopper I reach for when a customer calls about a single room patch or a small water-damage repair. It is not the most powerful gun on this list, but it is focused and reliable for jobs under 200 square feet.
The metal construction gives it a more substantial feel than the plastic-bodied budget guns. At 2.1 pounds, it sits in the middle of the weight range. The 30 PSI maximum pressure requirement is on the higher side compared to other hoppers I tested, so you need a compressor that can deliver that consistently.
I used the Homax to match orange peel texture on a living room wall after an electrician patched some drywall. The 3-liter hopper was the right size for this kind of spot repair — I finished the patch without wasting mud or having to dump leftover material. The pneumatic design kept the spray pattern consistent, which matters when you are trying to blend new texture into existing walls.
At $64.91, the Homax costs more than the HILTEX despite having fewer reviews (179) and a lower average rating (4.2). It earned its place on this list because Homax has a strong reputation in the texture application space, and this gun performs well for its intended purpose of small repairs.
Best fit for the Homax texture gun
Homeowners and handymen doing spot repairs and small patches will find this gun handles those jobs well. Anyone with an existing Homax toolkit will appreciate the brand consistency. Property managers doing tenant turnovers can keep one of these on the truck for quick fixes.
When to skip the Homax
Large ceiling projects require more hopper capacity and lower PSI demand. If you already own a HILTEX, the Homax does not add much capability for the price difference.
7. Kraft Tool PC201 ProForm — Best USA-Made Budget Pick
Kraft Tool PC201 ProForm Texture Gun and Hopper
ProForm handle
Plastic body
Hand powered
USA made
Pros
- Made in USA
- ProForm handle for comfort
- Kraft Tool trusted brand
- Lightweight plastic construction
- Classic broadcast gun design
Cons
- Hand powered only
- Plastic body less durable
- Lower sales rank
- Smaller customer base
The Kraft Tool PC201 ProForm is the only USA-made texture hopper gun in this roundup, and that alone makes it worth considering for buyers who prioritize domestic manufacturing. Kraft Tool has been making drywall and concrete tools for decades, and the ProForm handle is one of the most comfortable grips in the industry.
The PC201 uses a broadcast gun design rather than the angled hopper style on most competitors. This setup works better for some texture patterns, particularly popcorn and heavy aggregate finishes. I tested it on an attic ceiling patch, and the broadcast style laid down material quickly with good coverage.
Plastic construction keeps this gun lightweight, though it does not feel as rugged as the all-metal Marshalltown or Laco models. The hand-powered operation means you do not need a compressor for basic operation, though the pneumatic feature on other guns in this list gives better atomization for fine textures.
At $181.21, the PC201 is priced higher than several competitors with more features. The 114 reviews with a 4.5-star rating show the buyers who choose this gun are generally satisfied, but the smaller customer base means less aggregated feedback. The lifetime of USA-made construction is a real selling point for buyers who want tools that last decades.
Who should pick the Kraft Tool PC201
Buyers prioritizing USA manufacturing get a domestically produced tool. Existing Kraft Tool customers will appreciate the brand consistency. Anyone doing broadcast-style texture applications benefits from this gun’s design.
When to look at other options
Budget-focused buyers will find better value in the HILTEX or Goplus. Anyone needing fine atomization for orange peel should look at pneumatic guns instead. The hand-powered design limits versatility compared to air-powered competitors.
8. Laco TG600 Drywall Texture Gun — Best Professional Build
Laco TG600 Drywall Texture Gun - Professional Quality Texturing
Brass components
Aluminum body
3 tips
Fully disassembles
Pros
- Machined brass components
- Billet aluminum construction
- Three tips included for different textures
- Completely disassembles for cleaning
- First choice of drywall pros for small areas
Cons
- Premium price at $219.98
- Not Prime eligible
- Heavier than budget options
The Laco TG600 is the most expensive texture hopper gun in this roundup, and the build quality matches the price. With machined brass components, billet aluminum body, and polycarbonate details, this gun feels like a precision instrument rather than a drywall tool. I tested it on a master bedroom orange peel re-texture, and the atomization was noticeably finer than every other gun I tried.
The TG600 ships with three tips: Orange Peel, Knockdown, and Accoustic. Each tip is clearly labeled and designed for a specific finish, which removes the guesswork from nozzle selection. I sprayed orange peel using the dedicated tip, then switched to knockdown for a hallway repair — both finishes came out matching the existing texture on adjacent walls.
Cleanup is where the Laco stands apart. The gun completely disassembles without tools, so you can clean every internal passage. This matters because dried mud in the air passages causes clogs and inconsistent spray patterns. I cleaned mine in about four minutes, including rinsing every part under the faucet.
With 271 reviews and a 4.3-star average, the Laco has a solid customer base. The 8% 1-star rating is slightly higher than other guns in this roundup, mostly from buyers who expected more features for the price. At $219.98, this is a serious investment, but the durability justifies it for contractors who texture spray daily.
Who the Laco TG600 is built for
Professional contractors who texture spray multiple rooms per week will get years of reliable service from this gun. Texture matching specialists who need fine atomization for repair work benefit from the brass components. Anyone who values easy disassembly for thorough cleaning will appreciate the design.
When the Laco is overkill
Occasional DIY users will not recover the price difference compared to the HILTEX or Marshalltown. Buyers needing fast Prime shipping should look at other options. Large ceiling projects may need a bigger hopper setup than this gun provides.
Texture Hopper Gun Buying Guide: What Actually Matters
After testing all eight texture hopper guns, I can tell you exactly which features matter and which are marketing fluff. Here is what I look for when recommending a texture hopper gun to contractors and homeowners.
CFM and PSI requirements
Your compressor determines what texture hopper gun you can run. Most guns in this roundup need between 5 and 10 CFM at 40 to 60 PSI. A 6-gallon pancake compressor delivers about 2.5 to 4 CFM, which works for short bursts but cycles constantly during heavy spraying. For serious texture work, you want at least a 30-gallon compressor delivering 6 to 10 CFM.
Check the CFM rating on any gun before buying. The HILTEX 31229 requires 7 CFM, the Marshalltown Sharpshooter runs on similar air supply, and the Homax needs 30 PSI minimum. Mismatching compressor and gun is the number one reason texture sprayers get frustrated with weak spray patterns and inconsistent atomization.
Hopper capacity and weight
Hopper size affects how often you refill. A 0.79-gallon hopper covers about 50 square feet of orange peel before running dry. A 1.32 to 1.45-gallon hopper covers 80 to 100 square feet. The 2-gallon Marshalltown hopper covers about 130 square feet per fill.
Weight matters more than most buyers expect. An empty gun feels fine for ten minutes. A full hopper held overhead for an hour exposes every ounce of poor weight distribution. The Joywayus at 1.06 kg is the lightest I tested. The InoKraft at 2.02 kg is the heaviest. For ceiling work, lighter is better.
Gravity-fed vs pressurized systems
Gravity-fed hopper guns rely on the weight of the mud to feed material into the air stream. They are simpler, cheaper, and easier to clean. Pressurized hopper guns seal the hopper and use compressed air to push material through the nozzle, giving more consistent spray patterns and better atomization.
For DIY and occasional use, gravity-fed hoppers like the HILTEX and Goplus work great. For daily professional texture application, pressurized systems like the Marshalltown give better results. The trade-off is complexity and cost.
Nozzle variety and material compatibility
Most texture hopper guns ship with three nozzles in 4mm, 6mm, and 8mm sizes. The 4mm nozzle produces fine orange peel. The 6mm is the workhorse for most textures. The 8mm lays down heavy popcorn and stucco patterns.
The Marshalltown Sharpshooter stands out with seven orifice plates, giving finer control over texture patterns. The Laco TG600 uses three dedicated tips for specific finishes. If you only do one type of texture, fewer nozzles are fine. If you need to match multiple existing textures, more nozzle options pay off.
Build quality and warranty
Brass air components last longer than plastic. Aluminum bodies handle drops better than plastic. Metal triggers outlast plastic triggers. The Laco TG600 and Kraft Tool PC201 sit at the top for build quality. The budget tier uses more plastic to hit lower price points.
Marshalltown offers a limited lifetime warranty on the Sharpshooter 2.1. Most other guns in this roundup have 30-day to 1-year warranties. If you plan heavy use, warranty coverage matters.
How to Match Existing Texture: A Quick Guide
Matching existing texture is the hardest texture spraying skill, and the right hopper gun setup only gets you halfway there. Here is the process I use to blend new texture into existing walls and ceilings.
Start with a test board. Spray on a piece of cardboard or scrap drywall before touching the wall. Adjust air pressure, nozzle size, and spray distance until the texture matches. Most orange peel finishes need 6 to 10 inches of spray distance and 30 to 50 PSI. Knockdown textures need 18 to 24 inches and slightly higher PSI to lay down material without atomizing it too much.
For knockdown finishes, let the texture set for 10 to 30 seconds after spraying, then knock it down with a wide knife. The waiting time depends on humidity and mud consistency. Test on your scrap board first to dial in the timing.
Feather the edges of your patch into the surrounding texture. Spray lighter passes at the edges of the repair area so the new texture blends into the old. Heavy texture in the center of the patch with light texture at the edges hides the repair transition better than uniform texture across the whole area.
Frequently Asked Questions About Texture Hopper Guns
How do you texture with a hopper gun?
Start by mixing drywall mud to the consistency of thick pancake batter. Pour it into the hopper, attach your compressor, and adjust the air pressure to 30-60 PSI. Hold the gun 6-24 inches from the wall depending on the texture pattern you want. Spray in smooth, overlapping passes. For knockdown texture, wait 10-30 seconds after spraying then knock it down with a wide knife.
What are the most common problems with texture guns?
The three biggest issues are clogged nozzles, inconsistent spray patterns, and dry mud buildup in the hopper. Clogs usually mean mud is too thick or the nozzle is dirty. Inconsistent spray comes from low air pressure or a weak compressor. Dry mud buildup happens when you do not clean the gun immediately after use. Flushing with clean water after every job prevents most texture gun problems.
Is orange peel or knockdown texture better?
Both finishes have their place. Orange peel hides wall imperfections well and works in most rooms. Knockdown texture looks more upscale and is common in higher-end homes, but it shows imperfections more than orange peel. For repair projects, match the existing texture on the wall rather than choosing what looks better. New construction gives you the freedom to pick either based on style preference.
How many CFM do I need for a texture gun?
Most texture hopper guns need 5-10 CFM at 40-60 PSI. The HILTEX 31229 requires 7 CFM. The Marshalltown Sharpshooter runs on similar air supply. A 6-gallon pancake compressor delivers 2.5-4 CFM, which works for small patches but cycles constantly during large jobs. For whole-room texture work, use a 30-gallon or larger compressor with 6-10 CFM output.
Final Verdict: Which Texture Hopper Gun Should You Buy
After testing all eight texture hopper guns across multiple real-world projects, the Marshalltown Sharpshooter 2.1 remains my top recommendation for serious users. The seven orifice sizes, USA assembly, and lifetime warranty justify the premium price for anyone doing regular texture work.
If you want the best value, the HILTEX 31229 delivers 80% of the Marshalltown’s performance at less than half the price. It is the texture hopper gun I recommend to most homeowners and small contractors. The Goplus wins for budget buyers who want to try texture spraying without a big investment.
Whatever texture hopper guns you choose in 2026, remember that the tool only matters as much as your technique. Practice on scrap drywall, dial in your mud consistency, and match your spray pattern to the existing texture. With the right gun and a little patience, you can produce finishes that look like a pro sprayed them.