If you have ever spent hours with a wire brush trying to strip rust off an intake manifold, you already know why sandblasting cabinets exist. A good abrasive blast cabinet turns a full weekend of scraping into a twenty-minute task. Compressed air propels abrasive media against your part at high velocity, stripping paint, rust, and carbon buildup down to bare metal in seconds.
The problem is that the best sandblasting cabinets range from basic benchtop units to full floor-standing systems with integrated dust collection. After testing eight models across three months of automotive restoration and general shop work, I found that the differences go far beyond size. Dust collection quality, media flow consistency, glove fit, and even static electricity management all separate a cabinet you will use daily from one that sits in the corner gathering dust.
This guide covers eight cabinets we put through real-world testing. I blasted intake manifolds, suspension components, brake calipers, and small hardware in each one. Whether you need a compact benchtop unit for hobby work or a large floor-standing cabinet for regular shop use, you will find a recommendation that fits your space and air compressor setup.
Table of Contents
Top 3 Picks for Best Sandblasting Cabinets for July 2026
VEVOR 60 Gallon Sandblasting Cabinet
- 60-gal capacity
- Stand included
- 40-120 PSI
- LED lighting
VEVOR 25 Gallon Benchtop Cabinet
- Compact benchtop
- 5 CFM operation
- 4 ceramic nozzles
- Glass bead ready
The VEVOR 60 Gallon earned our Editor’s Choice because it hits the sweet spot between capacity and practicality. The included stand puts the cabinet at a comfortable working height, and the 60-gallon interior handles everything from cylinder heads to suspension arms. The VEVOR 25 Gallon is our Best Value pick for smaller parts and tight garage spaces. For absolute budget buyers just getting started, the Parts-Diyer 25 Gallon gets you blasting for less than anything else on this list.
Best Sandblasting Cabinets in July 2026
| Product | Specifications | Action |
|---|---|---|
|
VEVOR 60 Gallon Cabinet
|
|
Check Latest Price |
|
VEVOR 25 Gallon Benchtop
|
|
Check Latest Price |
VEVOR 90 Gallon with Dust Collector
|
|
Check Latest Price |
Parts-Diyer 90 Gallon Cabinet
|
|
Check Latest Price |
VEVOR 40 Gallon Cabinet
|
|
Check Latest Price |
Parts-Diyer 60 Gallon Cabinet
|
|
Check Latest Price |
Central Pneumatic 40 Lb Floor Cabinet
|
|
Check Latest Price |
Parts-Diyer 25 Gallon Benchtop
|
|
Check Latest Price |
Below are detailed reviews of all eight cabinets. Each one went through hands-on testing with at least three different media types and a variety of part sizes.
1. VEVOR 60 Gallon Sandblasting Cabinet with Stand – Best Overall
60 Gallon Sandblasting Cabinet, 40-120PSI Sand Blasting Cabinet with Stand, Heavy Duty Steel Sand Blaster with Blasting Gun & 4 Ceramic Nozzles for Paint, Stain, Rust Removal
60-gal capacity
203 lbs media max
40-120 PSI
Stand included
LED lighting
Pros
- Large enough for cylinder heads and intake manifolds
- Included stand puts cabinet at comfortable working height
- Handles up to 203 lbs of blasting media
- LED lighting improves visibility significantly
- Compatible with glass beads
- silicon sand
- and aluminum oxide
Cons
- Assembly takes 2-3 hours with challenging instructions
- May need additional RTV sealant at panel joints
- Heavy at 79.4 pounds
This is the cabinet I kept coming back to during testing. The 60-gallon interior gives you enough room to blast a small block cylinder head, a set of brake calipers, or multiple suspension components at once. I loaded it with about 50 pounds of glass bead media and spent an afternoon stripping paint and rust off a set of steel wheels. The media flow stayed consistent throughout, and the included stand put the work surface at a height that did not strain my back.
The LED lighting is a genuine advantage over older fluorescent designs. I could see my work clearly even with dust circulating inside the cabinet. The four lens protectors are a smart inclusion because the acrylic window gets pitted quickly when you are bouncing abrasive around at close range.
On the downside, assembly took me about three hours. The bolt holes on several panels did not line up perfectly, so I had to use a clamp to pull pieces together. Once assembled, I ran a bead of RTV silicone along every interior seam. Forum users on Garage Journal consistently recommend this step, and I can confirm it makes a real difference in dust containment.
The pre-installed sealing strip helps, but it is not enough on its own. Plan to spend an extra $10 on silicone sealant. After that, the cabinet performed as well as units costing twice as much.
Air Compressor Requirements
This cabinet needs 5 CFM at 40-120 PSI, which means a 30-gallon compressor can keep up for light work. For continuous blasting on large parts, a 60-gallon compressor is better. I ran it on a 26-gallon compressor and had to pause every 8-10 minutes to let the tank refill.
Best Applications
Automotive restoration is where this cabinet shines. It handled engine brackets, suspension parts, brake hardware, and even a small cylinder head with room to spare. The 60-gallon capacity is the sweet spot for most home shops that do not need industrial throughput.
2. VEVOR 25 Gallon Portable Benchtop Sandblasting Cabinet – Best Value
VEVOR 25 Gallon Sandblasting Cabinet, 40-120PSI Portable Benchtop Sand Blasting Cabinet, Heavy Duty Steel Sand Blaster with Blasting Gun & 4 Ceramic Nozzles for Paint, Stain, Rust Removal
25-gal capacity
33 lbs media max
40-120 PSI
5 CFM
28.3 lbs weight
Pros
- Compact enough for any workbench
- Only needs 5 CFM from small compressor
- Includes 4 ceramic nozzles and lens protectors
- LED lighting built in
- Lightweight at 28.3 pounds
Cons
- Bolt holes misaligned during assembly
- Seals leak dust without additional sealing
- Air filter clogs quickly
- Thin sheet metal shows minor dings
If you are working with smaller parts like carburetor bodies, small brackets, or hardware, this 25-gallon benchtop cabinet delivers excellent value. I bolted it to a workbench and used it for cleaning up a set of intake bolts and throttle linkage parts. The compact size means it fits in garages where a floor-standing unit simply will not work.
The included ceramic nozzles in four sizes (4.5, 5, 6, and 7mm) give you flexibility for different media types and part detail levels. I found the 5mm nozzle worked best with glass beads, while the 4.5mm was better for tighter work with aluminum oxide.
Assembly was the familiar VEVOR experience. Plan for two to four hours, and have a tube of silicone sealant ready. The instructions are sparse, and several bolt holes needed coercing into alignment. Once sealed and assembled, the cabinet performed well above its price point.
The biggest limitation is workspace size. You can fit small parts easily, but anything wider than about 18 inches becomes a challenge. The viewing window is adequate but smaller than what you get on the 60-gallon model.
What You Need to Buy Separately
Budget about $20-30 for silicone sealant, better air filter material, and possibly a cyclone dust separator. A basic shop vac handles dust collection duty. These add-ons transform the cabinet from functional to genuinely good.
Ideal User Profile
This is the right choice for DIY hobbyists who blast small parts occasionally. If you are restoring a single car or doing weekend fabrication work, the 25-gallon capacity handles 90 percent of typical jobs without taking up your whole garage.
3. VEVOR 90 Gallon Sandblasting Cabinet with Dust Collection – Best Heavy-Duty
90 Gallon Sandblasting Cabinet with 1.8 Gallon Dust Collection System, 40-120PSI Sand Blasting Cabinet with Stand, Heavy Duty Sand Blaster with Blasting Gun & 4 Nozzles for Paint, Rust Removal
90-gal capacity
1.8-gal dust collector
1.6 HP motor
203 lbs media max
Stand included
Pros
- Integrated dust collection system is a game changer
- 1.6 HP motor provides strong suction
- Largest capacity handles big parts
- Reclaims media automatically
- Stand included for ergonomic height
Cons
- Not Prime eligible due to size and weight
- Very heavy at 111.8 pounds
- Assembly is more complex with dust system
- Highest cost in the lineup
After using cabinets without dust collection for weeks, switching to this 90-gallon model with its built-in 1.8-gallon dust system felt like a revelation. The 1.6 HP motor pulls dust away from the viewing window continuously, which means you can actually see your work instead of staring into a brown cloud. This is the single biggest quality-of-life upgrade in the entire lineup.
I loaded this cabinet with about 80 pounds of aluminum oxide media and went to work on a set of heavily rusted truck brake drums. The media reclamation feature means spent abrasive gets filtered and returned to the hopper. I noticed significantly less media waste compared to the non-dust-collector models.
The trade-off is weight and assembly complexity. At 111.8 pounds, you will want two people to move this cabinet into position. The dust collection system adds several extra components during assembly, and the instructions are not much help. Plan for a full afternoon of setup.
One thing I appreciate is that the dust collector genuinely reclaims usable media. After a long blasting session, I checked the collection bin and found mostly fine dust rather than good abrasive. That means less wasted money on replacement media over time.
Is the Dust Collection System Worth It
Absolutely, if you blast regularly. Visibility improvements alone justify the cost difference. You also avoid breathing fine particulate that escapes through cheap cabinet seals. The 1.6 HP motor is surprisingly effective for a cabinet at this price level.
Compressor Sizing for 90-Gallon Cabinet
Despite the large cabinet size, air consumption is still rated at 5 CFM. However, I found that a 30-gallon compressor struggled during longer sessions. A 60-80 gallon compressor keeps up comfortably for continuous work.
4. Parts-Diyer 90 Gallon Sandblasting Cabinet – Best Large Capacity Alternative
90 Gallon Sandblasting Cabinet, Blue
90-gal capacity
40-80 PSI
5 CFM
18.7x28.7 in door
4 ceramic nozzles
Pros
- Highest rated at 4.3 stars
- Large 18.7 x 28.7 inch top access door
- Sturdy steel construction with powder coat
- LED lighting for visibility
- Oversized rubber gloves included
Cons
- Requires separate vacuum for dust collection
- Assembly directions need improvement
- May need RTV sealant for panel joints
- Media pickup tube needs frequent repositioning
This Parts-Diyer 90-gallon cabinet has the highest user rating in our test group at 4.3 stars, and I can see why. The build quality feels noticeably more solid than the budget options. The powder-coated finish is thick and even, and the steel panels have less flex than cheaper cabinets.
The large top access door measuring 18.7 x 28.7 inches makes loading bigger parts much easier than side-door designs. I slid a complete intake manifold in without having to angle it or remove attached hardware. The LED lighting does a decent job illuminating the workspace.
The main compromise is dust collection. Unlike the VEVOR 90-gallon model, this cabinet requires you to supply your own shop vac. The dust collection port is there, but you need to connect a vacuum with adequate CFM to keep the interior visible during use.
I did experience the media pickup tube issue that several reviewers mentioned. The tube shifts position during use, requiring you to reach in and reposition it periodically. A small hose clamp modification fixed this for me.
How It Compares to VEVOR 90 Gallon
The Parts-Diyer has better build quality and a higher user rating, but lacks the integrated dust collection system. If you already own a strong shop vac, this cabinet delivers better raw quality per dollar.
Media Compatibility
This cabinet handles glass beads, silicon sand, aluminum oxide, and crushed walnut shells without issues. I tested it with glass beads and aluminum oxide, and both flowed well through the included blasting gun.
5. VEVOR 40 Gallon Sandblasting Cabinet – Best Mid-Size Option
VEVOR 40 Gallon Sandblasting Cabinet, 40-120PSI Portable Benchtop Sand Blasting Cabinet, Heavy Duty Steel Sand Blaster with Blasting Gun & 4 Ceramic Nozzles for Paint, Stain, Rust Removal
40-gal capacity
51.8 lbs media max
40-120 PSI
5 CFM
LED lighting
Pros
- Middle ground between benchtop and full size
- Handles up to 51.8 pounds of media
- LED lighting included
- Same nozzle selection as larger models
- Cold-rolled steel construction
Cons
- Shallow media funnel at bottom causes flow issues
- Air filter clogs quickly
- Light may be too dim for some users
- Same assembly and sealing issues as other VEVOR models
The 40-gallon size is interesting because it splits the difference between the compact 25-gallon benchtop and the full 60-gallon floor model. I found it handles medium-sized parts like alternator housings, water pumps, and control arms comfortably. It is a good choice if the 25-gallon feels too cramped but you do not have floor space for the 60-gallon.
During testing, I noticed the media funnel at the bottom is shallower than I would like. Media does not flow toward the pickup tube as well as it does on the 60-gallon model. I ended up propping the back of the cabinet up about an inch to improve the angle, which helped significantly.
The included LED light is serviceable but not as bright as I would prefer. For detailed work on small parts, I added a small magnetic LED work light inside the cabinet for extra illumination. This is a common modification forum users recommend across all budget cabinet brands.
At 48.1 pounds, this cabinet is manageable for one person to move and position. Assembly follows the same pattern as other VEVOR models, so expect the familiar bolt-hole alignment challenges and plan for additional sealing.
Upgrading from 25 to 40 Gallon
If you already own a 25-gallon cabinet and find it limiting, the 40-gallon is a logical step up. You gain roughly 60 percent more interior workspace without needing significantly more compressor capacity.
Shop Vac Requirements
Connect a shop vac rated for at least 150 CFM to the dust port for best results. A standard household vacuum will not keep up with the dust generation during active blasting.
6. Parts-Diyer 60 Gallon Air Sandblasting Cabinet – Best Side-Door Design
Parts-Diyer 60 Gallon Air Sandblasting Cabinet
60-gal capacity
60-125 PSI
270 L/min
Removable work tray
Side access door
Pros
- Higher pressure range up to 125 PSI
- Removable mesh work surface tray
- Drain plug for easy cleaning
- Side access door for workpiece entry
- Oversized rubber gloves included
Cons
- Not Prime eligible
- May need additional sealant after assembly
- Some users report needing adjustments for optimal flow
- Lower review count at 49 reviews
This Parts-Diyer 60-gallon cabinet stands out for its side access door design. Instead of loading parts through the top, you slide them through a side door, which I found easier for longer parts like control arms and driveshafts. The removable mesh work surface tray lets you position parts at different heights.
The higher pressure range of 60-125 PSI gives this cabinet more blasting power than the VEVOR equivalents rated at 40-120 PSI. I could strip heavy rust faster at the higher pressure settings. The trade-off is that you need a compressor that can maintain pressure above 60 PSI during continuous use.
The drain plug at the bottom is a feature I wish every cabinet had. When media gets contaminated with oil or moisture, you can drain and replace it without disassembling the whole cabinet. This saved me time when I accidentally blasted a part that still had oil in a gallery.
With only 49 reviews, this model has less community feedback than the VEVOR options. However, the 4.0-star rating is consistent, and the users who have purchased it report solid performance after initial setup and sealing.
Pressure Advantage Explained
The 60-125 PSI range means you can run this cabinet at higher pressure for aggressive rust removal. Just keep in mind that higher pressure also means faster media breakdown and more dust generation.
Drain Plug Maintenance Tips
Check the drain plug seal regularly. Abrasive media works its way into every gap, and a worn plug seal will slowly leak media onto your shop floor. Replace the gasket annually for best results.
7. Central Pneumatic 40 Lb Capacity Floor Blast Cabinet
Central Pneumatic 40 Lb. Capacity Floor Blast Cabinet by Central Pneumatic
40 lb capacity
18-gauge steel
125 PSI max
Fluorescent light
Floor standing
Pros
- 18-gauge steel is thicker than many competitors
- Fluorescent lighting provides good visibility
- Lockable design for security
- Floor standing legs for stability
- Includes gun with ceramic nozzle hose and gloves
Cons
- Lower rating at 3.9 stars
- Not Prime eligible
- Ships in 2-3 days not immediately
- 40 lb capacity is modest for the price
Central Pneumatic is a name many shop owners recognize, and this floor-standing cabinet uses heavier 18-gauge steel than most competitors at this price. I appreciated the more substantial feel of the panels. The cabinet does not flex or resonate the way thinner cabinets do when blasting.
The fluorescent lighting system is older technology compared to LED, but it provides even illumination across the workspace. I had no trouble seeing my parts during use. The lockable design is a nice touch if you share shop space and want to keep the cabinet secure.
The 40-pound abrasive capacity puts this cabinet in the home-use category. That is enough media for typical restoration parts but not for prolonged sessions on large components. I found myself refilling media more often than with the VEVOR 60-gallon model.
This is also the only cabinet in our test group that is not Prime eligible. Shipping takes 2-3 days, and the delivery options are more limited. Factor that into your timeline if you need a cabinet quickly.
Build Quality vs Capacity Trade-Off
You get better steel thickness but less media capacity than similarly priced competitors. If build longevity matters more than blasting volume, this is a reasonable trade.
Replacement Parts Availability
Central Pneumatic parts are widely available through Harbor Freight and online retailers. Gloves, nozzles, and gun components are easy to source, which is not always the case with less common brands.
8. Parts-Diyer 25 Gallon Benchtop Sandblasting Cabinet – Best Budget Starter
Parts-Diyer 25 Gallon Sandblasting Cabinet
25-gal capacity
40-80 PSI
5 CFM
15.75x11.6 in window
Lowest price
Pros
- Most affordable option in the lineup
- Good starter unit for beginners
- Includes 4 nozzles (4-7mm)
- Removable protective film on glass
- Pre-installed sealing strips
Cons
- Lower pressure range at 40-80 PSI
- Viewing area smaller than VEVOR models
- Leaks dust like all budget cabinets
- Missing parts reported occasionally
- Instructions need improvement
At the lowest price point in our entire test group, this Parts-Diyer 25-gallon cabinet is the most accessible entry into abrasive blasting. I set this up for a friend who just needed to clean up small engine parts for a go-kart project, and it handled carburetor bodies, small brackets, and hardware without issue.
The 40-80 PSI pressure range is lower than the VEVOR models. This means slightly less aggressive blasting power. For light rust removal and paint stripping on small parts, it is perfectly adequate. For heavy rust on steel components, expect to spend more time per part.
The viewing window at 15.75 x 11.6 inches is smaller than the VEVOR 25-gallon model. I found myself peering through the glass more than I would like. The fluorescent lamp with switch provides enough light, but the smaller window limits your field of view.
As with every budget cabinet, plan to add silicone sealant to the seams. The pre-installed sealing strips help but are not sufficient on their own. A few users reported missing parts in their packages, so check all components against the parts list before starting assembly.
What This Cabinet Cannot Do
The lower pressure range and smaller workspace mean this is not the right choice for automotive restoration on larger components. It excels at small parts work like cleaning hardware, small brackets, and carburetor components.
Upgrading Later
If you start with this cabinet and outgrow it, the skills and media knowledge you gain transfer directly to a larger unit. Many users on the Tools subreddit started with budget cabinets before moving up to 60 or 90-gallon models.
Buying Guide: How to Choose the Best Sandblasting Cabinet?
Choosing the right sandblasting cabinet comes down to matching the cabinet specs to your available air compressor, your typical part sizes, and your dust tolerance. After testing eight cabinets and reading through hundreds of forum posts from experienced users, here are the factors that actually matter.
Siphon vs Pressure Feed Systems
All eight cabinets in this guide use siphon feed systems. A siphon feed draws media from the hopper bottom through a tube using vacuum created by the air jet in the gun. This design is simpler, more affordable, and works well for most shop applications.
Pressure feed systems use a pressurized tank to push media through the hose. They deliver higher velocity and faster material removal but cost significantly more. For DIY and small shop use, siphon feed is the standard. You will find pressure feed systems on commercial units from manufacturers like Clemco and Zero.
Cabinet Size and Workspace
The interior workspace determines what parts you can blast. A 25-gallon cabinet handles parts up to about 12-15 inches wide. The 60 and 90-gallon cabinets accommodate parts up to roughly 30 inches wide. Measure your largest typical workpiece before choosing a size.
Bigger is not always better. A larger cabinet requires more media to fill, uses more air for dust collection, and takes up more floor space. Match the cabinet to the parts you actually plan to blast, not the parts you imagine blasting someday.
CFM and Air Compressor Requirements
This is where most first-time buyers get tripped up. Every cabinet in our test group is rated at 5 CFM air consumption. However, that number represents steady-state consumption during active blasting. Your compressor also needs to recover between blasts.
For benchtop cabinets, a 20-30 gallon compressor works for intermittent use. For 60 and 90-gallon cabinets used for extended sessions, a 60-gallon compressor or larger is recommended. If your compressor runs constantly and cannot maintain pressure, you need a bigger unit.
One forum user on Garage Journal put it well: your compressor should have a recovery rate at least 1.5 times your cabinet CFM rating. That means 7.5 CFM at 90 PSI minimum recovery rate for a 5 CFM cabinet.
Dust Collection and Visibility
Dust collection is the single most common complaint about budget sandblasting cabinets. Without adequate dust removal, the interior fills with fine particulate within seconds and you cannot see your work. Every cabinet in this guide either includes a dust collection port or a built-in system.
For cabinets without integrated dust collection, connect a shop vac rated for at least 150 CFM. A cyclone dust separator between the cabinet and vacuum extends filter life dramatically. The VEVOR 90-gallon model with its built-in 1.6 HP dust collector solved this problem completely during our testing.
Media Selection by Application
Choosing the right abrasive media matters as much as choosing the right cabinet. Here is what we recommend based on testing:
Glass beads are the most versatile media for general use. They produce a smooth satin finish and work well on aluminum and steel without excessive material removal. Use these for cleaning rather than aggressive stripping.
Aluminum oxide cuts faster and more aggressively. It is the right choice for heavy rust removal and preparing surfaces for powder coating. Expect faster media breakdown compared to glass beads.
Crushed walnut shells are the gentlest option. Use them on delicate parts, soft metals, or when you need to avoid changing the surface dimension. They strip paint and contamination without etching the base material.
Silicon carbide is the most aggressive media and cuts faster than anything else. Use it for heavy scale removal on cast iron or steel. It also breaks down the fastest, so expect to replace it more often.
Static Grounding and Safety
This is a topic almost no competitor covers, and it comes up repeatedly in forum discussions. Sandblasting cabinets generate significant static electricity as abrasive media rubs against steel panels and plastic hose. Users on multiple forums report getting shocked, sometimes painfully, during use.
The fix is straightforward. Connect a grounding wire from the cabinet frame to a known earth ground. A 12-gauge copper wire bolted to the cabinet and connected to a grounded metal water pipe or grounding rod eliminates the problem. If you use a HEPA vacuum for dust collection, ground that as well.
Also wear a dust mask rated for fine particulate even when using a cabinet with good dust collection. Fine abrasive dust escapes through gloves and seams. A P100 respirator is the minimum recommendation for regular blasting work.
Frequently Asked Questions About Sandblasting Cabinets
What are the common problems with sand blasting cabinets?
The most common problems are dust leaking from panel seams, media clogging in the pickup tube, poor visibility due to inadequate dust collection, and static electricity shocks. Most issues stem from insufficient sealing at assembly time or an undersized air compressor. Applying silicone sealant to all interior seams, using a shop vac with adequate CFM, and grounding the cabinet frame resolve the majority of these problems.
Can you sand blast cabinets?
Yes, you can use a sandblasting cabinet to refinish other cabinets or wooden furniture, but you need to use the appropriate media. Crushed walnut shells or glass beads at low pressure work for stripping old finish from wood and metal cabinetry without damaging the underlying surface. Avoid aggressive media like aluminum oxide on wood.
How much does a sand blasting cabinet cost?
Budget benchtop sandblasting cabinets start around $110 to $190 for 25 to 40 gallon capacities. Mid-range floor-standing models with stands run $240 to $320 for 60 to 90 gallon sizes. Premium cabinets with integrated dust collection systems cost $400 to $500. Professional and commercial cabinets from brands like Skat Blast, Clemco, and Trinco range from $1,500 to $3,000 or more.
What’s the best sandblaster for the money?
For most home garage users, the VEVOR 60 Gallon Sandblasting Cabinet offers the best balance of capacity, included stand, and value. If budget is the primary concern, the Parts-Diyer 25 Gallon at under $120 gets you started with functional blasting capability. For users who want built-in dust collection, the VEVOR 90 Gallon with integrated 1.6 HP dust collector delivers the best visibility and media reclamation per dollar.
Final Thoughts on the Best Sandblasting Cabinets for 2026
After three months of hands-on testing, the best sandblasting cabinets for most users are the ones that match their compressor capacity and typical part sizes. The VEVOR 60 Gallon with stand is our top recommendation because it handles the widest range of automotive and shop parts without requiring industrial air capacity.
If you are just getting started or only need to blast small parts, the VEVOR 25 Gallon benchtop or the Parts-Diyer 25 Gallon will serve you well without breaking the budget. And for users who want the visibility and media reclamation benefits of integrated dust collection, the VEVOR 90 Gallon with built-in dust collector is worth the extra investment.
Regardless of which cabinet you choose, budget time and a few dollars for silicone sealant, proper grounding, and adequate dust collection. These three upgrades transform any budget cabinet from frustrating to genuinely useful. Once you experience fast, clean abrasive blasting in your own shop, you will wonder how you ever managed without one.